CN

CN/EN

/
/
/
X2/X4 Extended Version, AC & USB Input NiMH Li-ion Battery Charger

X2/X4 Extended Version, AC & USB Input NiMH Li-ion Battery Charger

  • Time of issue:2020-02-20 17:49

X2/X4 Extended Version, AC & USB Input NiMH Li-ion Battery Charger

Information

Everyone always has a lot of rechargeable batteries, especially for flashlights. Therefore two or three different chargers must be prepared for each charge. Many people use AC port chargers because they feel that the voltage of the charger is sufficient and safe to charge. However, this charger can only be used at home and requires a special charging cable, so it is not convenient when going out. Then they prepare another USB port charger when traveling or charging in the car. There are also some protected 21700 batteries on their hands, so they prepare a charger that is compatible of this battery size. Now XTAR's upgrade chargers - X2 and X4 extended version can solve all these problems, no need to prepare a bunch of chargers.

 

Widely compatible, Ni-MH, Ni-Cad and protected 21700 batteries can also be charged
The X2/X4 extended version can not only charge 3.6v / 3.7v lithium batteries of various sizes, but also 1.2v Ni-MH and Ni-Cad batteries of various types. Now the popular 14,500, 18650, 26650, AA, AAA batteries all can be charged. It can also be applied to protected 20700 and 21700 batteries.

 

Dual input ports, can be charged anytime, anywhere
X2/X4 extended version has both AC input port and Micro USB input port, you can choose according to your own situation: indoor use the charger's own power cord and AC port to charge; outdoors can use phone adapter and Micro USB port to charge. It meets the charging needs of users in different scenarios.

 

Self-selection of charging current, fast charging, multiple protections
X2/X4 extended version, the charging current can be selected independently in 0.5A*2, 1A*2 and 2A*1 modes, and the 2A charging current can fill a 18650 2500mAh battery as fast as 1.5 hours. In addition, the charger has a built-in MCU mode to accurately determine the full capacity, and it can stop charging immediately when the battery is fully charged. It also has multiple protection technologies such as overcurrent, overcharge, overvoltage, short circuit, and soft start, so you can charge your batteries overnight without worry.

 

LCD screen, real-time control charging status
The X2/X4 extended version adopts a dial-type LCD display, which can clearly display the battery charging information, including battery charge percentage, voltage, current, and charged volume. This is very convenient for users to understand the battery charging status.

 

0V activation function saves over-discharged batteries
X2/X4 extended charger can recover some over-discharge batteries. Insert the battery and the charger will automatically detect and activate the battery. If you have a lot of old batteries that have been stored for a long time, you can use this function to filter out batteries that can still be used to avoid waste.

 

In addition, the X4 extended version also has an output function that can charge mobile phones, cameras, PAD and GPS and other devices. This function may not be used frequently, but it’s nice to have if urgently needed.

 

This really is a very convenient and simple operated smart charger, plus the consistent high quality of XTAR charger, you will have a perfect usage experience.

Keyword:

搜索
Search

  

Email: info@xtar.cc

Tell: (+86) 755-25507076 (Monday to Friday: 9:00-18:00)

Fax: (+86) 755-25507076

 

Address: 5th Floor, No.77 Xinhe Rd, Shangmugu, Pinghu Area, Longgang District, Shenzhen, Guangdong, China

 

 

 

Copyright © 2019 ShenZhen XTAR Electronics Co., Ltd   ICP备09125997号

Powered by www.300.cn  

TOP