Forum Replies Created

Viewing 1 reply thread
  • Author
    Posts
    • #38804
      Fabian
      Participant

      What device / scene do you change batteries most often?

      IoT devices which operate with AA and AAA batteries like Garmin smart scale, Bosch radiator thermostats…

      How many batteries do you usually need?

      About 20 AA and AAA Li-ion batteries

      What charger & batteries do you currently use? What bothers you?

      I use the XTAR L4 Pro with Li-ion AA/AAA batteries.

      I would need some clarification on why is there only the CE marking on the XTAR AA/AAA batteries.

      One thing which doesn’t bother me once I received a clarification from your customer service which I recommend to add in your documentation:

      • When you use a charger that does not have a separate indicator to show the charging status of each battery slot, such as XTAR LC4 and XTAR LC8, the AAA 1620 battery controls the charging process. When the battery is fully charged, its indicator light will remain constantly on.
      • However, when you charge the AAA 1620 inside the XTAR L4 Pro charger, the charger manages the charging process because it has a display screen that shows the charging status of each battery slot. In this case, the charger’s own indicator system takes over, and the LED on the battery will turn off after charging is completed. This is the normal and intended behavior when used with the L4 Pro charger.
    • #38803
      Fabian
      Participant

      What device / scene do you change batteries most often?

      I use a Nikon Z6III camera which can operate via a USB-C Power Delivery (PD) source such as a power bank or via its own internal battery.

      Use case 1: astrophotography session at night, or a long video recording session during the day – the camera is connected to a power bank for long hours

      • the batteries in the power bank needs to be kept warm when it is very cold outside to maximise battery efficiency
      • the batteries can be changed in the power bank to extend time sessions

      Use case 2: use a power bank to recharge camera batteries (see Nikon PD battery charger MH-34) on the fly

      How many batteries do you usually need?

      6x 21700 batteries for now

      What charger & batteries do you currently use? What bothers you?

      I bought a XTAR PB2SL V2 with 21700 6000mAh batteries

      1. It is not powerful enough to operate a Nikon Z6III camera directly, I would need min 27W (9V/3A) – I can only use the XTAR PB2SL V2 with the Nikon battery charger MH-34
      2. Both the XTAR PB2SL V2 and XTAR 21700 6000mAh batteries bought in Europe do not have the Chinese marking CCC so I cannot travel to China with them! Why?

      My recommendations to XTAR:

      1. Create a new XTAR power bank for 21700 batteries which can support min 27W (9V/3A) and 2x to 4x 21700 batteries
      2. Make sure that all future products have all the required product certifications like the CCC marking for China in addition to FC and CE.

Viewing 1 reply thread